|
NESD | The ECU is mounted on the inside of the left hand frame rail right at the rear of the engine, I would first check that the connector is securely in the EZU, then remove the plug-in from the ECU and look very closely at all of the terminals in the plug to make sure one isn't partially out of place, next is the connector on the right side of the rocker arm cover where the wires run to the injectors, make sure it is in place securely. Or better yet get the dealer off his butt and come check it out, it is under warranty. I have a hard time believing it is a software issue. | |
|
4730 will only start when it want's
