|
Southwestern, MS | We have been using the 2600 to control Raven 440 and 660 to VRT N-Sol in cotton and corn. It works great. All you will actually need is JD wiring harness (RS232 adaptor for GS2), P/N PF 90363 (double check this P/N with dealer). Like BrianS said above, if your Raven is equipment with an RS 232 port, the JD wiring will plug right in. All the instructions, for making this work, come with the Complete Goods shipment. You can use Apex, Farmworks, or SST to write your Rx files. If you buy the GS2 Rate controller, it will replace the Raven 440 box, and instead use all the Raven wires with the JD system. This setup works pretty well also.
Hope this hopes
Edited by MeGuedon 1/12/2008 22:10
| |
|