|
| I have got an EZ-Steer 500 with Omni XP on a 8410 with a plow that cuts 10'6" with an offset of 20" to the right. The implement settings are set for those measurements. The operator set an AB line on the west side of the field (heading south) and then drove to the east side and plowed down through (headed north). Then back to the west and the plow lined up perfectly and the ez-steer did a great job of holding the line. When returning back to the east side it put the guidance line and hence the tractor to far to the left. I believe it to be the offset, but I don't know how to fix it. Any suggestions from anyone that has any experience with this. I could move the antenna to the center of the plow, but there may be an easier fix.
What are your suggestions?
RFG
| |
|
Molboard Plow Problems with EZ-Steer
