|
NW IL | Trying to determine why I can't get good flow to my booms. I am 80% sure it'd an issue with my control valve not opening. (Water cycles with plenty of force in the tank.) I put it directly on 12v and the butterfly opens fine, but if I hook to the 450 and turn on the master on switch it makes a short wine but doesn't move.
I hooked the volt meter directly into the green and white lines going to the value and get no volts. Do I have the correct settings on the 450? Shouldn't I be getting power to the value when master switch is on?
Speed cal is at 1000 which has always worked in the past for stationary output. Rate bumped to up to 20gal.
Redwall sprayer.
 (17140695755996183508178551706327 (full).jpg)
Attachments
----------------
 17140695755996183508178551706327 (full).jpg (127KB - 14 downloads)
| |
|
Raven 450 troubleshooting
