|
ec. nebr. | On mine yrs. ago when this happened. I took the center block bottom plugs out carefully, watch as the pieces come out in right order to put back together. There was a tiny piece of o-ring stuck in seat of 1 valve causing the issue you have. With the planter folded out, if I put it in transport mode with the console switch, and lifted the planter again, it would rephase those cylinders. THen back into plant mode, and I could plant about 1/2 a round before repeating this. Taking the valves out of the bottom fixed my issue.
Edited by flyboytoo 4/21/2024 18:46
| |
|
Deere 1770NT Planter Hydraulic Problems
