|
Jeffersonville, OH | So, I know less about the hydraulic system on those than I do the newer stuff, but it is a Closed Center, Constant Pressure system....it's is Flow Compensating, not Pressure AND Flow, so pressure remains constant.
So, your pressure staying the same is correct.
Most likely, your relief valve has gotten weak, and needs more shims. It's likely spilling over relief at all times, and heating the oil
I'll go dig up the book procedure for you and scan it in.
Chris
Edited by c_mayer 4/19/2024 13:36
| |
|
White 2-110 Hydraulics overheating
