Posted 4/18/2024 06:38 (#10711001 - in reply to #10710490) Subject: RE: case 1200 16/31 new to me- seed tube sensors not reading
North Liberty and South Bend, Indiana
Being daisy chained when a sensor fails or more likely has a pinched/grounded wire it shows as failed and some or all of them after it. So you need to check over the harness and sensor wiring very closely. You also need a known good sensor and plug it in in each position and see if that cures the issue. I believe after plugging in a new sensor you need to "reset planter" in the display.