|
| Make a couple passes, side by side, traveling in the same direction with your planters. If the spacing is consistent and doesn’t vary much then your planter is not pulling straight, very common. My 6 row 1750 has a 2” offset to the left I believe. If your spacing is still inconsistent then it is a different issue and make sure the settings are correct for center point and that it didn’t get switched to something else like WAAS.
Sounds more like a corrections issue than anything else to me since it was not consistent? I have no experience with centerpoint.
Edited by k_m_coors 4/19/2024 05:26
| |
|
Trimble auto steer issues.........
