|
Southern Illinois | A standard autoboom will be a raven and caseih only interface. You can connect a viper pro/enviso pro/viper4 or cnh pro700 type display to operate the boom height.
AIM cmd works as pressure control with a rate+/- signal of a std valve. With an AgLeader liquid module, you have to set it like it's running a std valve. Then it will send +12 or -12v signals on the 2 wires for AIM CMD rate control.
The issue is you cannot run the boom height through the AgLeader display unless you swap out the normal raven autoboom module for one that is ISO bus. Raven allows the pro700 sprayer software to interface with normal raven can bus messages but no other display will communicate with the factory raven autoboom node. | |
|
|