|
NorthCentral Illinois | Also need a power harness from rate controller back to 1/2 width solenoid’s to each one. Helped a neighbor convert his mounted rate controller on front post closets to hitch. That way the rate controller would reach tractor ISO plug it was cheaper to have AgExpress make the harness to go back to the clutch’s. Reason for the power cable was rate controller doesn’t send enough voltage out to solenoids to activate them they need 12 volts. The power harness plugs into the extra 12 volt plug on the rate controller harness to control the 1/2 width. | |
|
Kinze 3600 - Half width shutoffs
