There is an external RTK radio connector in the roof near the gps receiver and the data bridge / factory modem device. If you are not going to use the factory modem then you can connect any ntrip client to this connector or a BT adapter with a phone app.
This connector is similar on most models with Novatel *6 or *7 series as well as Trimble 382 and later AGI4 receiver harnesses.
Edited by JHEnt 1/9/2024 10:12
 (novatel external connector agco parts (full).jpg)
Attachments
----------------
 novatel external connector agco parts (full).jpg (62KB - 24 downloads)
| 
RTK over NTRIP to Fendt
