Midwest | lcook - 1/5/2024 10:02 We did it for years on a Kinze planter that was controlled through an Ag Leader display. It works just fine. You have to get the cable that tee's into the starfire harness on top of the cab at the receiver and then it feeds into the Ag Leader harnesses. You then check some NMEA output settings in the receiver setup on the greenstar display. This will feed location and and speed date into the AL display. It's been a while, so I can't remember the specific NMEA outputs you need, but somebody on here should be able to tell you.
Yep, correct.
And to the OP, you won't have any issues w/ the differences in north since you're not steering across brands. The JD guidance is just fine, the AL planter monitor is fine as well.
The north issue is if you have an AL steered machine and a different JD steered machine and put 0 as your heading in a long field. You're fine with your setup.
|
Starfire reciever to Ag Leader display
