Near Intersection of I-35 & I-90 Southern Mn. | I checked Amazon and see there are several choices. I assume that when changing the pressure switch, I would need to bleed the brakes?
I've done this in the past (almost 60 years ago on a car) but haven't done it lately. I assume the procedure is the same and that there is a bleeder on each brake assembly.
Maybe bypassing the pressure switch to a momentary switch would be easy enough but I wouldn't have brake lights then unless I manually pressed the momentary switch.
Today, I decided that if I push the brake pedal down, release and push it down a second time, the starter seems to engage every time. Guess I'll see how long that lasts before I do anything.
Edited by tedbear 6/2/2023 11:40
|