|
| I’ll be the minority opinion and say I like that kit. The bushing you slide over the pin is eccentric. You can rotate the bushing with the big hex washer on the end until the gauge wheel moves parallel to the opener. No more arms that get tighter or looser to the opener as they swing. I put them on, put all the shims on the inside, adjust the hex washer until travel is parallel, then mark the hex washer with a sharpie, then shim the gauge wheel, finally put the hex washer back on and rotate to the marked position. Sounds like a lot, but it goes fast. If your very picky and want everything perfect they are a good kit. | |
|