|
SESD | I'm using the 1200 and 6500 receiver. With the raven system, the pump was activated through the envizio pro and I had to be in a job. The agleader has the stand-alone toggle switch, which seems like it should have nothing to do with anything else on the sprayer. So there was never a dedicated pump switch in the Hagie.
Mine is a PWM 12 volt setup.
The booms fold/unfold overhead button that needs pushed is only for the wing flip out/in. This all works in "road mode", but need to switch to "field mode" do actually spray. This also removes 3rd gear from working.
I did try hooking battery cables from the batteries to the terminals. It didn't make it work any different. It does seem like low voltage, but I thought that would have done something. With the flip outs folded up, it does raise just a little like it is directing some power there, but when they are out and it takes more pressure, they don't move at all.
I'll probably try unhooking from those terminals and running to the battery just to eliminate that today. | |
|