|
Sioux County, NWIA | I forget exactly where but it was an online driveline supply. It needs be a bolt style taper lock hub or it will want to walk on the shaft. NH did offer an 18 tooth sprocket late in the 7090 run I think, but that is too slow. There is something about the 20 tooth driver that seems to sync the pickup feed rate to the stuffer and the floor roll. I never quantified the difference but it was very noticeable between two otherwise identical equipped balers; off hand I would say about a 25% gain. | |
|
Baling cornstalks with a New Holland or Case IH
