AgTalk Home
AgTalk Home
Search Forums | Classifieds (189) | Skins | Language
You are logged in as a guest. ( logon | register )

Where does foot switch connect to ez steer/cfx 750
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
WildBuckwheat
Posted 1/23/2023 14:12 (#10055282 - in reply to #10054893)
Subject: RE: Where does foot switch connect to ez steer/cfx 750


Middlesex County, Ontario
The foot switch connects to the T2 for EZ steer, it needs a db25 connector. The foot switches that you see with a Deutsch connector are for EZ Pilot.

The foot switch will plug into the un-used 25 pin connector on the T2 and will connect pins 10 and 11 when depressed, leave pins 10/11 open when released. If you would prefer a toggle switch in your arm rest you can make your harness with any momentary switch and by cutting up a parallel port extension cable, using a db25 plug with screw terminals, or soldering small wires into a db25 connector. I have made several cables like this.

You will have to change the ez steer engage settings to "remote engage."

Edited by WildBuckwheat 1/23/2023 14:16
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)