central - east central Minnesota - | johnwayne360 - 7/2/2022 22:07 found a brush cutter(maybe) woods ds80 pull type. how bad of an idea would it be to offset the tractor drawbar all the way to one side to get a little bit of offset. Its 80 inches wide, would like to stay away from the fence a bit with the tractor. The only consideration is when you turn - the offset will be harder on the knuckles when turning that one way. Otherwise, it works. And of course if you have too big of power on the pto, that can be hard on it, when the blades hit the ground |