|
Winkler, Manitoba Canada | I assume you are talking about the elbow that comes off the turbo on a 855 Cummins. I used the elbow or rather 180 off of a 9270 when I transplanted a 855 into my Ford FW20 (PT Steiger). At the time the Steiger part was available but the pipe for the 9270 was much cheaper. The rest of the exhaust will likely have to be modified to work with this but that would not be a big job. Basically you use the 180, some flex and a 45 and you land up at the 90 into the bottom of the stack. Lands up looking neater than the original Steiger exhaust. Case part #90-5776T1
Edited by WTW 6/10/2009 21:05
 (IMG_0718.jpg)
Attachments
----------------
 IMG_0718.jpg (42KB - 59 downloads)
| |
|
steiger exhaust elbow
