|
| Well Chad I am pretty shure you can guess where mine came from that's right the local hutterite colony bent the iron actually If I remember correctly we made 3 of them from a 4 x 8 sheet of 1/2 sheet of steel I did the welding, the back two holes are already in the frame but I needed to drill the front two on each side works good have only had to use it a couple of times have had it for 3 - 4 years now had it on my previous tractor and kept it for this one also. Oh the tractor is a 9320 with a little extra HP thanks to Alex @ PDQ peformance in Florida somewhere around 450 to be exact pulls right with the neighbors 9520 anyways. Dennis SEND
Edited by Dennis SEND 11/25/2009 14:27
| |
|