Posted 3/25/2008 22:32 (#341856 - in reply to #341735) Subject: RE: Leveling the toolbar on a DB60 JD planter
Driftless SW Wisconsin
Chad,
The 24R30 DB60's don't generally need the weights like the 36R20 on the same bar. There are 50% fewer row units requiring wt to be transferred from the same toolbar (if that makes any sense). You should be a lot closer, especially with markers
I do believe I have seen a DB bar or two pulling from the lower links however I may be confusing with the 1770NT 60 ft bars.
Leveling the toolbar on a DB60 JD planter
