|
| Have an early riser that as you go across the field one row will slowly start showing a lowering population and eventually will show failed. When you get to the other end and turn around it will repeat itself. Have cleaned the sensor, replaced the sensor, unplugged and replugged all connectors, turned the monitor off and back on, and finally moved the questionable sensor to a different row but the problem did not move with the sensor. When you check the population in the ground everything seems to be in order for spacing on the seeds. This is on a 800 12R30. Seems like maybe I have a high resistance connection or a bad cable to the row in question. Any suggestions? | |
|