|
Rivers, MB | The two pins that are part of the "scissor hinge" where the cylinder attaches to (for folding the outer section of the 60/90 boom) won't take more than part of a shot of grease. Is this a big concern? The grease nipple is not plugged so it must be that the groove in the bushings for the grease is plugged. What's involved in taking those 2 pins. Need to support the outside section of the boom I'm assuming. Any other tricks or things to watch for?
Thanks in advance.
| |
|
4700 JD sprayer boom hinge won't take grease
