Posted 4/7/2009 15:37 (#672491 - in reply to #672350) Subject: So far, so good.
So far, the cylinders I've gotten from SC have been working fine. I do have some reservation about the pull strngth of the ones with the eyelets like I used on the lift for the forkift, but the eyeletted ones on the tilt I think have enough iron around the eye. You might want to take an extra look at that part if you are going to be pulling the eyelet cylinder much. Otherwise, seems to be a fine cylinder IMO.
Old Pokey or others... forklift leveling cylinders ?
