|
EC Indiana | I'll give this a shot.
I dont have a datatronic or GTA console.
Valves 1 and 2 on joystick should be controlled by the datatronic (I think). Without a Datatronic you can control the flow by pushing and holding a button on the console in front of the joystick while moving the joystick to set the desired flow. Haven't figured out the exta function button on the joystick yet.
The 3rd remote controlled by lever on the right console.
4th electrically controlled (not sure about this one)
The 2nd lever on the right console I would assume opperate 4th remote.
I don't have a datatronic so not sure of its capabilities.
The levered remotes on our tractors RT145 have flow control knobs under the seat. Accesable through a window under/behind the seat. We have to dial in our flow here, which also allows us to set detents. If you are setting marker detents, at least on Kinze planters, the manual says to set the tractor flow to max then use the adjustments on the planter to set the marker raise and lower speed.
Not sure about the emergency lever for the 4th remote. It sounds like it should be operated by the 2nd lever on the right console.
I can look at the servicebook tomorrow and see if it has info on DT160s.
bk
| |
|
|