Somewhere in North central Iowa | I needed to mount a planter and drill monitor in my 7140 and had very little steel to mount it to. I built my own mounting bracket off the right front cab post. In order to get things how I wanted them I had to fabricate, then mount in the cab only to find out I was off by a half inch one way or another. After about 20 modifications I built one that worked.
It just takes time and practice.
Mounting things in my 2-135 White is easy. All steel post runs up the right side of the cab. Just measure and drill.
John |
Where do you mount monitors on older tractors?
