|
| Does anyone know if it is possible to just tee into the hydraulic lines someplace on a 624H Deere payloader and just put a loader style valve on to run a quick attach I know I would have to get out of the cab to retract the cylinders and again to lock them on again but I would not be doing it alot most of the time I would either have the bucket or the forks on very seldom I would have to change it more than once a day ,if it would work I could save a lot of money as the electronic valve and switch that goes in the cab is rather spendy was told it costs over 3K. Dennis SEND | |
|
Payloader Quick Tach
