|
| My Arts-way grinder has a grease zerk above the gearbox that is under the mixer.
Prior to replacing the bearing that the zerk is for I had no idea that the zerk was there. It's not listed in the operator manual and you can't see it or touch it without taking the gearbox off of the mixer. After replacing that bearing I told 2 other people with AW grinders about that zerk and neither of them knew about it.
The new bearing has a 12" long grease gun hose threaded into the zerk hole with a zerk on the end of it making it easily accessible. This bearing should last until the rest of the machine is shot. | |
|