|
| Ours is a 92 model and we have had to weld the slipclutches to the splines as a harvest fix two different times, the only other things I can tell you to look for is to check the sheetmetal on the auger floor pan cause ours has gotten pretty thin and had to be patched up pretty good last year, and check out to make sure the auger driven sprocket is running true cause there is a stubshaft there that breaks, and that the drive sprocket hasn't been welded to the shaft cause the set screws come loose after a while and you have to replace the shaft and the sprocket. Other than that, good luck with it! We are still running ours and prolly will for a few more years. | |
|
Hugger corn heads- early serial numbers
