Ayr Queensland Australia 4807 | I have not come across this for a while i would only be guessing but the ACU could be a problem like the other post suggested see if you can get a code , or have a tech look at it he should be able to tell what it is very quickly as he can go into the pcu and check if the acu is telling the pcu to act ,if it was not going above 13th i would say it is the trans pressure switch but for the lower gears it maybe somthing different come back with a code ,or clean the gear lever magnets ,i have never needed to do this before somthing may have come adrift .keep us posted |
8300 won't shift up
