|
WCIL | May look in the back lots of some Deere dealers. We found a rough 6ft one and gave $100. Bottom was shot, so we torched it out and welded a new floor in. We used an old grader blade for the cutting edge, then ran 4 lengths of old snow plow blades perpendicular behind that for runners. Put another grader blade across the top with chain hooks and a blade on each side on the leading edge. Painted it and it has held up fine. Spent about a day on it. Original buckets were way too light for much more than scooping from piles. | |
|
Bucket for JD 148 loader
