|
Cen Ks | Our 85 GMC 6500 needs a new cord end on 2-speed axle switch. The push-pull switch on gearshift is ok, the problem is the 3 pin connector on cord going to rear axle. Many older Chevy, GMC and Ford all use the same setup. The switches seem to be available, but I need the cord end to repair cord. Where do I find one ? FYI: It's a mold rubber cord end with 3 sockets in it. About 3/4 in. x 2 in., contacts are molded into the side, cord come out the end. TIA | |
|