Near Intersection of I-35 & I-90 Southern Mn. | Don is correct. We had some confusion on a system due to the fact that Ag Remote "took over" and changed the settings as Don as indicated. Apparently this is to get the optimal connection when hooked to a PC. This was not an autopilot situation but the problem and solution may be the same.
I believe in our case (My Coworker was actually doing this), the problem came about due to the 8-O-1 setting whereas the equipment receiving the GPS was needing 8-N-1. Once he realized this and changed the setting back to 8-N-1 the problem was solved.
I have been out harvesting and was not aware of the updates. Since I am using an Insight, 332 and autopilot I may have some of the same issues if I update.
Sounds like the problem may be with your 252. I would have the advantage of being able to review the settings on the 332's display screen.
What imporvements are supposedly involved with the two updates?
Edited by tedbear 10/3/2006 07:34
|