AgTalk Home
AgTalk Home
Search Forums | Classifieds (3) | Skins | Language
You are logged in as a guest. ( logon | register )

grain bin with single phase power
View previous thread :: View next thread
   Forums List -> Crop TalkMessage format
 
E718
Posted 11/22/2008 09:28 (#513375 - in reply to #513123)
Subject: Re: grain bin with single phase power


Sac & Story county IA
I have built and used converters for past 20 years. I have a 20 and 25 hp fans running now. ( in the snow storm)
A rotary phase converter or the new inverters will work fine. The 20 and bigger hp inverters are too new to know how long the last but what I have been around have been good. I have had a couple that quit and I don't know why. They were ebay bargains so just get another and don't bother with repair.
Realize that 3 phase power is more complicated than single. On single phase, if one line doesn't have juice, the motor stops. On 3 phase, if you loose a phase when the motor is running, it will keep going but heat. If your thermal overloads are proper, it will probably trip out or not.
If I were to start from nothing, I would probably use a dual idler converter setup, about 2 - 30 hp motors. Then, put the balance capacitors on the load side of the contactor for each motor.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)