|
| The door is 14' high the installer added a Aluminum channel strip to the top that makes it 14' 1" then the bottom standard rubber seal they shoved a solid 1" round foam piece inside making the door 14'2" the opening is 14'4"
14'3" is needed to get combine under with bin extentions up ..anything else i added to the door bottom when in the open postion would hang down and catch on combine or catch on the I beam header when closing
door when closed sits at each end on solid cement blocks center 20' has 2" open space I could just lay a 2x4 down for winter
was thinking of taking a Cow Mat and cutting in strips laying it on the ground to complete the seal could still run combine over it would squish down
something like a tube that was inflateable would be idea
Think a combine tire fronts and backs would give enough running over a piece of angle iron ?
Edited by Gambler 10/25/2008 19:29
| |
|
Anyone have source for speed bump type door seal
