|
Clatonia, NE | You can do one of the following:
1) You can hook an implement switch up so it turns the logging on/off based on lowering the implement. You need a 4001225-1 key pad splitter, implement switch, and header extension cable.
2) You can hook the leads on your master switch to a power relay and go into 500 to turn you logging on/off with your master switch. Close the leads is on and open is off right now--the new 3.05 upgrade will let you set it to your preference.
The pedal goes into the control box on the EZ Steer and can only be hooked up through there.
| |
|
EZ Guide 500 coverage mapping
