|
MN | On a Yield mapping system side mount moisture sensor you can only have one client. When you save setup data to the data card with Apex you select that you are saving data for a side mount moisture meter. Then on the bottom you select which client. If you have multiple clients the best option is to have a data card for each client. So you will only be able to change the farm and field. This is one of the differences between yield mapping and harvest doc. You could however put software on the moisture sensor that would program it to a harvest monitor system and if you had a keycard with Harvest Doc on it you could then have multiple clients setup on one data card. You wouldnt select that you are saving data to a side mount moisture meter this time. I have never done this but In theory it should work. Hope this helps.
| |
|
deere yield mapping---once again
