|
Gibson City, IL | You use the drone deploy app. Photos only. All autonomous.
Turn drone on at take off/ landing site
Open Dronedeploy app
It will connect to the drone and show your location on a satelite map
A flight box will auto generate, drag corners to cover the area you want to fly
Press the gear icon in bottom left corner if want to change altitude and camera overlaps
On controller change mode switch to F
Press Checkmark in lower right corner when flight plan is ready, it will check all systems.
Press Airplane button in lower right corner, drone will start props and take off
Drone will fly fight plan taking pictures as it goes, when done will auto return home an land
Remove card from drone and put in computer
Log in to dronedeploy.com, for each flight that you did there will be a line named Smart Survey
On right hand side of that line select upload photos, and upload photos on card
Map will auto stitch, give it 30 minutes of so depending on number of acres.
Randy | |
|
Guys using drone deploy
