Might I suggest some RAM mounts? They are more expensive than building a mount yourself but allow for way more positioning of displays to the operators likings and are VERY quick to move from machine to machine.

Here is what I finally settled on after trying 3 different combinations. Mount is a 3" x 3" angle iron screwed to the corner post with ball attatched.

Note that we don't have Touchset display. Don't have much use for it.

(100_0675.JPG)

(100_0680.JPG)

100_0675.JPG (78KB - 104 downloads)

100_0680.JPG (79KB - 100 downloads)