AgTalk Home
AgTalk Home
Search Forums | Classifieds (66) | Skins | Language
You are logged in as a guest. ( logon | register )

RTK Using the MN CORS VRS with EZ Steer 500
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
D Lager
Posted 7/15/2008 19:01 (#415944 - in reply to #415841)
Subject: Re: RTK Using the MN CORS VRS with EZ Steer 500



Adams, MN
The EZ Guide 500 is unlocked for RTK and uses the Z Plus antenna. The InTime Connection is needed to stream the correction data to the EZ Guide 500. The InTime Connection cost about the same as a rover radio (900 MHz). We use this tractor for testing and demo and take it all over. We have not used an external antenna or a booster on it. The HTC 6800 phone just sits in the cup holder. We do have one system out that we put on a booster, since it was going to be used where there was no cell coverage, and it performed very well. We do bundle the InTime connection with a power supply, mount and an external antenna.

There is no comparison to this InTime on the VRS and using a single base and rover. Whether it's a tower network or a single private base station, you are working with only one reference station at a time. The VRS uses the 6 nearest reference stations to you. Just no comparison. We have even taken this into Iowa, 20+ miles south of the state line, with very good results. I was just there today checking repeatability. The point of the sweep (pictured in the video) was right down the middle of the mark from the previous times.

Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)