|
roaming | The IntelliView Plus II has a 9-pin (DE9) connector integrated into the bottom of the display. You can connect here directly with a 9-pin (DE9) female serial cable connected to your receiver. Or you can connect into the white 10-pin connector located under the right hand console, if you prefer to minimize the clutter/cables attached to the display.
If you choose the 10-pin, you'll set your display to RS232A. If you choose the 9-pin, use RS232B. Receiver configuration will be the same, regardless of which port you use. What receiver are you connecting? | |
|
GPS receiver for NH combine
