|
Callao Missouri | I took the valve core out of the rt dual, jacked the tractor up using several blocks in a crib pattern, and took several hitches doing it. I then installed the dual hub with only one of the u bolts making contact with the axle shaft, bent my 3/4 breaker bar tightening that u bolt, and installed outer dual wheel. I then called my neighbor to bring his other tractor down 5230 cih I tied a chain onto the lower cross bar of his quick attach plate for the loader, to the draw bar of his 14. We drove 3 miles real slow with him taking some of the weight off my tractor with the front end loader. We unhooked in front of the shop, I drove in and jacked the tractor up, used a jack stand under the Trans housing, removed the dual tire and then ...................................
I removed the dual hub without having to loosen the u bolt I bent the 3/4" breaker bar tightening.
Thanks all for the advice, If I had a camera I would have posted some pictures! Latter Jon | |
|
1486, broken rear axle shaft, how to get it home?
