Features of the GS2 1800 display include:
7 inch color screen
Integrated display control with 14 buttons and scroll wheel
On-screen maps
Available Pro Modules include AutoTrac™ (SF1, SF2, RTK), PivotPro, and Swath Control Pro™ (See note below*) Limitations of the GS2 1800 display include:
No documentation features
No Map Based Prescriptions
Not a touch screen display *Note: Customers who desire touch screen, documentation capabilities or map based prescriptions with a SeedStar™ 2 cart or seeding tool will require the GS2 2600 display.
GreenStar 2 monitors these functions:
GreenStar 2 monitors these functions:- Fan speed
- Ground speed
- Shaft speed of front and rear meters
- Bin levels (full/empty only)
- Area seeded
- Increase/decrease seeding/fertilizing rate on-the-go from the tractor cab with SeedStar 2
- Main and tank meter clutches (on/off)
The GS2 1800 does not support Field Doc™ or Map-Based Prescriptions. Customers wanting
to run these GreenStar 2 applications will need to upgrade to the GS2 2600 display. 
SeedStar 2 (flex box) interfaces with the GreenStar 2 display, providing data to the operator in the tractor cab. GreenStar 2 is an intelligent operator system when interfaced with SeedStar 2. It provides online rate charts as well as functional displays for the cart.
One master switch disengages all meters when turning at headlands or point rows.
Buttons on the GreenStar 2 display, working with drive clutches, allow meters to be disengaged at operator's discretion, i.e., front tank and rear tank compartments.
Relative information is displayed within reach of the operator.
A potentiometer-style seeding tool remote switch allows the operator to tailor the exact height at which the cart's main clutch will engage or disengage, minimizing seed waste on headlands.
| 
Interesting.
