Posted 6/6/2008 21:34 (#392018 - in reply to #386197) Subject: Re: Anyone Install an EZ-Boom in a Rogator 1254
North Dakota
Got it installed and running. Was pretty simple to hook up after looking how the wires come out of the handle switches. Made a six foot cable from the 16 pin connector on the EZ-Boom to the 12 pin deutsch connector with 6 orange wires from the handle. Made a TEE connector (1 male-1 female) with 5 boom wires hooked into the wires on one end. It will run the booms only, not connected to control the spray pressure.
Anyone Install an EZ-Boom in a Rogator 1254
