|
| Depends....
If you are going to a 4x0 controller - and you want the EZBoom to control flow and booms - then you should be able to plug the harness directly into the back of the EZBoom
If you are using a 4x0 contoller and only want boom control you need a "T" cable to connect the two controllers together.
If you are using a 4x00 controller you need an adapter cable or a "T" cable depending on what you want the EZBoom to control.
All of these cables are explained in the EZBoom Cabling Guide that are available on Trimble's EZBoom website under the support tab. They are available from your Trimble dealer or any CNH Dealer.
Hope this helps. | |
|
ez boom
