|
| I have a BR 355 gps speed sensor (USglobalsat shown below) that I got with the 20/20 monitor and I use a dj3000 (old brown box) monitor for my bean planter on a 7140 tractor with no radar. The gps speed sensor has a female DJ style 4 pin connector (monitor has same connector) - is there a way to get the output of the br355 to work with the DJ monitor?
Thanks,
Pat
PS: I connected a radar Y cable to what I assume is a magnetic pickup on the 7140 with, but no worky (dash speedo works fine though). Apparently the dj wants a radar signal and the 7140 mag pickup must be different than the radar output. | |
|
Gps speed sensor to DJ3000 monitor
