|
Creighton, NE | Here is a picture of the implement switch on our 1770 nt. This is on the left side where the transmission for the seed drive would be. I'm going to hopefully be using an Insight to direct drive a rawson which is mounted where the transmission used to be. I am setting this up with seed command using the 1/2 disconnect clutches that are factory installed from deere.
 (IMG_2263 (Small).JPG)
Attachments
----------------
 IMG_2263 (Small).JPG (50KB - 94 downloads)
| |
|
Seed Command Set Up?
