|
Central Mo | We did ours in '83, I'm sure they improved them a lot after that. We had the metering valves on the wing cylinders but didn't seem to help much. We just learned to live with it going up and down uneven. We actually got rid of the slave cylinder under the tonge and the planter went up and down better. On the end when lifting the planter the center would come up about 8 inches first then the outside would come up, then the opposite going down, the end of the bar woudl go down 8 then center would start down. Figured out the pounds per sq in was greater on the outside than center, since the cylinders were just t'd together oil went the easiest way first. | |
|
Can rigid 12R30 JD 7000 be made to flex?
