|
Monroe Oregon | I'm not sure on how you have the two talking to each other. In my experience with AgLeader to MID-TECH is with a 6100 to a PF 3000 Pro linked together with a data link and the AgLeader is only telling the 6100 what the rate for that area is. I still have cal. through the 6100 as normal. Here is what I do wether it's liquid or dry. Make sure you are zeroed out before you start. Put in a known amount of product. Apply it and see if the total applied is the same. If not turn the dial to total applied in setup and move the cal. # up or down until it reads the amount you put through the machine. Not sure how the Insight work with the 6100, but why not take the 6100 out of the system and get the harness to plug into the MID-TECH components, and do it all with one console. | |
|
Midtech 6100 controller to insight HELP
