|
SE North Dakota | If a 7510 is wired like a 7800, when you plug into that 6 pin harness, there will be no unswitched power. Your quickstart will not work, and if you are running a 2600 display, all of your coverage maps will disappear when you turn to key off because the display will not power down properly. You will have to run a power wire and install it in the connector with the right pin contact. If I remember right there is no wire in that spot of the tractor side of the connector, so it will fit right in. Maybe I'm mistaken, and they fixed this on the newer tractors. Just a heads up. | |
|
Greenstar harness in 7510
